Fractal Question!, Please help I can't figure it out!!!
Alex Feather
Jan 16 2012, 08:43 PM
Instructor
Posts: 4.332
Joined: 21-November 11
From: Los Angeles
Hi I recently purchased Fractal AXE FX ULTRA and I am very happy with
it! The only thing I can figure out is how to use a stereo input
I plug my guitar in to front input and getting only left channel I
tried setting it up for stereo in I/O menu but still only left
channel! Please help I can't find answer anywhere!

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
Saoirse O'Shea
Jan 17 2012, 10:50 AM
Moderator - low level high stakes
Posts: 6.173
Joined: 27-June 07
From: Espania - Cadiz province
QUOTE (Sinisa Cekic @ Jan 16 2012, 10:15 PM) *
...
You should to use a balanced outputs, but anyway, each digital processor operates on the same principle, I use unbalanced outputs, two cables for the left and right channel, if you want a stereo sound on a PA .


+1 - If the utput is a normal mono 1/4 inch jack then you need to connect it as Sinisa says. A normal jack is not balanced and may lead to hum and noise issues.

If it is a stereo out then a normal guitar jack at a stereo output is not the correct connector. If you're lucky you will only get a single mono signal - the left channel. If you're unlucky you can blow the connector. A stereo 1/4 inch output needs a TRS jack which can then be split to left and right etc. TRS is also balanced.

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!


--------------------
Get your music professionally mastered by anl AES registered Mastering Engineer. Contact me for Audio Mastering Services and Advice and visit our website www.miromastering.com

Be friends on facebook with us here.

We use professional, mastering grade hardware in our mastering studo. Our hardware includes:
Cranesong Avocet II Monitor Controller, Dangerous Music Liasion Insert Hardware Router, ATC SCM Pro Monitors, Lavry Black DA11, Prism Orpheus ADC/DAC, Gyratec Gyraf XIV Parallel Passive Mastering EQ, Great River MAQ 2NV Mastering EQ, Kush Clariphonic Parallel EQ Shelf, Maselec MLA-2 Mastering Compressor, API 2500 Mastering Compressor, Eventide Eclipse Reverb/Echo.
Go to the top of the page
 
+Quote Post



Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 




RSS Lo-Fi Version Time is now: 25th April 2024 - 04:50 PM