Fractal Question!, Please help I can't figure it out!!! |
|
|
|
|
Jan 16 2012, 09:17 PM
|
|
Eh, I don't have much experience with this stuff at all, but after having a look, have you tried using the rear inputs? (Source: http://acapella.harmony-central.com/showth...=1#post32417515)
-------------------- Ibanez 2550E
LTD EC-1000 VB Roland Cube 30W |
 |
 
|
|
|
|
|
|
Jan 16 2012, 09:43 PM
|
|
Axe Fx Wiki
Looks like you have to use the rear inputs This post has been edited by PosterBoy: Jan 16 2012, 09:43 PM -------------------- My SoundCloud
Gear Tyler Burning Water 2K Burny RLG90 with BK Emeralds Fender US Tele with BK Piledrivers Epiphone 335 with Suhr Thornbuckers PRS SE Custom 24-08 Ax8 Fessenden SD10 PSG Quilter TT15 |
|
|
|
|
|
|
|
|
Jan 17 2012, 02:38 AM
|
|
QUOTE (Alex Feather @ Jan 16 2012, 07:51 PM)  My problem is I have right and left channel on fractal And only left is working I know that guitar is mono and that's why it could be like that but I've seen people running it the same way and getting both channels to work! Do you mean that some people find the way to duplicate mono guitar and process it as a stereo signal? I'm a bit confused about what you want to do... I don't know the fractal but maybe adding some stereo FXs and setting the output to stereo could work... don't you think so? -------------------- My lessons
Do you need a Guitar Plan? Join Gab's Army Check my band:Cirse Check my soundcloud:Soundcloud Please subscribe to my:Youtube Channel |
|
|
|
|
|
|
|
|
Jan 17 2012, 10:50 AM
|
|
QUOTE (Sinisa Cekic @ Jan 16 2012, 10:15 PM) ... You should to use a balanced outputs, but anyway, each digital processor operates on the same principle, I use unbalanced outputs, two cables for the left and right channel, if you want a stereo sound on a PA . +1 - If the utput is a normal mono 1/4 inch jack then you need to connect it as Sinisa says. A normal jack is not balanced and may lead to hum and noise issues. If it is a stereo out then a normal guitar jack at a stereo output is not the correct connector. If you're lucky you will only get a single mono signal - the left channel. If you're unlucky you can blow the connector. A stereo 1/4 inch output needs a TRS jack which can then be split to left and right etc. TRS is also balanced. -------------------- Get your music professionally mastered by anl AES registered Mastering Engineer. Contact me for Audio Mastering Services and Advice and visit our website www.miromastering.com
Be friends on facebook with us here. We use professional, mastering grade hardware in our mastering studo. Our hardware includes: Cranesong Avocet II Monitor Controller, Dangerous Music Liasion Insert Hardware Router, ATC SCM Pro Monitors, Lavry Black DA11, Prism Orpheus ADC/DAC, Gyratec Gyraf XIV Parallel Passive Mastering EQ, Great River MAQ 2NV Mastering EQ, Kush Clariphonic Parallel EQ Shelf, Maselec MLA-2 Mastering Compressor, API 2500 Mastering Compressor, Eventide Eclipse Reverb/Echo. |
|
|
|
|
|
|
|
|
Jan 17 2012, 08:55 PM
|
|
Thank you very much guys!!! You really helped a lot to figure it out! It's a very complicated unit and I am trying to get use to it!
-------------------- |
|
|
|
|
The above is how you connect it - just remember to go to I/O and have the settings on stereo, or it'll sound bad |
|
|
|
|
Jan 18 2012, 10:00 AM
|
|
I was so unhappy at church when they had to take on of my channels on the mixer and put me to mono. No stereo delays any more or different cabs feeding the Left and Right.
-------------------- My SoundCloud
Gear Tyler Burning Water 2K Burny RLG90 with BK Emeralds Fender US Tele with BK Piledrivers Epiphone 335 with Suhr Thornbuckers PRS SE Custom 24-08 Ax8 Fessenden SD10 PSG Quilter TT15 |
|
|
|
|
 
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
