I have recently purchased a 1993 USA Peavey Predator with the intention of upgrading all the hardware. For those of you who aren't familiar with the USA Peavey Predator, its essentially a Strat copy with a kinda funny looking headstock. The neck and body were made in the US, and the hardware were made in the Far East I believe.
Brand new its was sold for less than $300, and on first inspection it is quite obvious where Peavey cut corners to bring down the price - the hardware is shit. Terrible tuners, cheap tremolo made from pot metal, and mediocre pickups.
There is one advantage this guitar has over its Fender counterpart, and that is the neck. It is a very fast and comfortable, and made from two pieces, thereby making it resistant to warping. The fretboard does have a gloss finish, which I don't particularly care for, and I wish it had a darker tint to it. It has medium frets, not exactly my first choice, I would much rather have jumbo frets.
The other area where this guitar strays from the typical Strat is the body wood. It is a Poplar body, and from what I've read on the forums it has an alder cap. Now before you knock it for being made of poplar, Fender themselves have claimed that poplar is just as good of a tonewood as alder. In fact, some of the first Strats were made with poplar. During the 90's Fender could not get their hands on any alder and used poplar as a substitute on their USA series guitars.
Anyways, all this talk of tonewood is trivial, for the thing that matters most is how it sounds - thats it. I have played it, and it does have a nice resonance to it. The guitar sounds good unplugged, which is a good sign. It does sound a little thin, but this can be attributed to the cheap pot metal tremolo block. An upgrade to a steel block could cure this.
So, here are the upgrades I have planned for this guitar, which is ALL of the hardware. The only thing that shall remain stock is the neck and body. I want to keep this as cheap as possible, but don't want to sacrifice too much on quality.
- Peavey USA Predator - $150
- Wilkinson WV6SB tremolo - all steel parts with a steel block - $32
- Tonerider Pure Vintage Pickups with white covers - $100
- RS Guitarworks Complete Vintage Upgrade Kit with Jensen oil and paper capacitor - $63
- Black Triple-ply pickguard - $10
- Dunlop Strap Locks - $14
Now what I haven't decided on yet is what kind of tuners I would like to get. I know for sure I would like to get locking tuners, just how much I want to spend is another matter. Guitar Fetish has some for around $35 and the Sperzels on eBay are around $50-60.
The final upgrades I would like to do are a Graphtech nut and string trees. I think I'll have the nut installed by a luthier, not sure yet.
As far as the aesthetics, I'm gonna hit the body with some steel wool to get rid of the gloss and give it a satin finish, I think it will contrast nicely with the glossy pickguard. In the end its gonna look somewhat like David Gilmour's black Strat. Thats not the way I planned on it happening, I didn't even want a black guitar. I actually wanted a white guitar and planned on blacking out all the hardware. However, when you buy used you can't always get exactly what you want.
Now I'm sure some of you are saying I could get a used USA Fender for around $400, and that argument does have merit. However, for me this more than just having a great guitar, it is also a learning project. By the time I'm done I will know more about different aspects of the guitar than I previously did, plus I hope you guys can benefit from my project as well.
I would like to thank Stratman79 for his suggestion of the Tonerider pickups. From the demos I've heard on Youtube they sound great and the price shall save me a few bucks.
If any of you guys have attempted a similar project and have some good advice to give, it will be greatly appreciated. Thanks for taking the time read this long post!
You are at GuitarMasterClass.net
Don't miss today's
free lick. Plus all our lessons are packed with
free content!
Mudbone Building A Usa Strat On A Budget Sep 26 2010, 07:54 PM
