Printable Version of Topic

Click here to view this topic in its original format

GMC Forum _ CHILL OUT _ Would This Ruin My Guitars Finish ?

Posted by: ruben_mcn Jul 10 2010, 01:57 PM

Hi guys I´m thinking on putting some declas on my Gibson les paul studio 08 and i was just wondering ifd they could ruin my guitar´s finish ??

http://www.paintyourownguitar.com/store/decals.html

I was gonaa put a rebel flag 1 or 3 on it smile.gif

btw: do yo guys think this will be hard to aplly to the guitar ??

Posted by: ZakkWylde Jul 10 2010, 02:29 PM

I wouldn't do it because:
1. The Gibson Nitro laquer is very vulnerable (even some guitar stands attack the laquer) so glueing some sticker on might ruin it forever
2. Those decals usually look really cheap (not fitting right on the edges...) There is a reason why this page does not have a gallery with applied decals on some guitars - because it doesn't look professional
3. Applying those decals correctly is very hard, it's the same with decals on cars. If not done by a pro you will get air bubbles under it.
4. It only covers the front! If you look at your guitar from an angle you can see a totally diffrent color. Looks bad imho...

If I would want a design like this, I would get my whole guitar airbrushed instead of putting some sticker on it.

Posted by: ruben_mcn Jul 10 2010, 02:33 PM

Thanks For your wisdom Zakk ! smile.gif

Posted by: Vasilije Vukmirovic Jul 10 2010, 02:53 PM

I checked the site, and read info, they say it can't be damaged, you can move it all around.
By the way this is excellent site...

Posted by: ruben_mcn Jul 11 2010, 12:44 AM

So this wouldn´t Damage my Gibby´s finish ???

Posted by: Bogdan Radovic Jul 11 2010, 02:09 AM

I wouldn't do this for same reasons Zakk mentioned.

+ There are no videos or success stories on the web site so I wouldn't trust it much.

Posted by: Daniel Realpe Jul 16 2010, 04:20 PM

GREAT SITE

Posted by: Staffy Jul 16 2010, 04:42 PM

I wouldnt do it either on a nitro-laquer - its so sensitive that even put the guitar in the wrong type of guitar stand will make damage to the guitars back.... (if the rubber is of the wrong type on the stand, which is the case of cheap ones)

//Staffay

Posted by: Trond Vold Jul 19 2010, 11:11 PM

I'm sceptical towards this too..

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)