Voxengo Teote (a Must Have For Mixing) Options

[Mertay]

https://www.voxengo.com/product/teote/

An automatic (dynamic) balancer plug-in, once you get the sound close enough to where you like use this to really nail the balance. It's not easy on the cpu so use towards the ending of your mixing.

It's only been a day since release but I think I have enough idea on parameters so feel free to ask. There are similar stuff out there but I found this to be easy and fastest alternative.

edit;

My advice for first test, it works immediately upon insertion. These will likely be the most used parameters;

-First test "fx" which is like global amount
-Click "apply to range" and adjust hi-lo if it sound too in-your-face. If "apply to range" is not clicked, it cut's like an eq.
-If its too dark/bright compared to original sounds, adjust "slope". Bypass when comparing, if plug-in is too loud/quiet you'll see the level difference on the right (right under output gain)

You are at GuitarMasterClass.net

Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!

This post has been edited by Mertay: Oct 18 2020, 03:56 PM

[Mertay]

You are at GuitarMasterClass.net

Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!