Printable Version of Topic

Click here to view this topic in its original format

GMC Forum _ GEAR & PRODUCTION _ Metal Zone+line 6 Floor Pod

Posted by: Marell Dec 9 2007, 06:23 PM

I have boss MT-2 and I want to buy Line 6 Floor Pod. I have a question: is it possible to change between lets say phaser+(MT-2) to delay+flanger (clean guitar) with only pushing on one pedal on Floor Pod? (phaser, delay and flanger come from Pod). Thanks in advance.

Posted by: David.C.Bond Dec 10 2007, 02:26 PM

Not as far as I am aware of, since there is no way of controlling your stomp box with your Pod.
Although I don't have either of them so I'm guessing.
Any more insights guys?

Posted by: Toni Suominen Dec 10 2007, 02:36 PM

No, im 95% sure that you cant control any external pedals with the pod. In order to do that, the floorpod would need an effects loop, which I dont think it has. But you can check it out from Line6's website smile.gif Hope this helps

-Toni

Posted by: Marell Dec 10 2007, 05:25 PM

Thanks guys, but even if I can't do that I'll try to do this: switch effect (exampe flanger to delay on floor pod) one riff before the clean guitar comes in and then turn off MT 2-hope it will work, blink.gif

Posted by: Milenkovic Ivan Dec 10 2007, 05:39 PM

You must step on both pedals together in order to turn on\off 2 osunds. WIth practise you can accomplish it. First turn off the phaser and then MT2, and then turn on those 2 other effects. If you do it fast it can work.

Posted by: Marell Dec 10 2007, 08:05 PM

QUOTE (Milenkovic Ivan @ Dec 10 2007, 05:39 PM) *
You must step on both pedals together in order to turn on\off 2 osunds. WIth practise you can accomplish it. First turn off the phaser and then MT2, and then turn on those 2 other effects. If you do it fast it can work.


This will be funny doing a gig laugh.gif but have to try mad.gif

Posted by: Bogdan Dec 11 2007, 02:34 AM

QUOTE (Marell @ Dec 10 2007, 08:05 PM) *
This will be funny doing a gig laugh.gif but have to try mad.gif


Ivan does it all the time wink.gif Its cool wink.gif Just arrange them that you can step on both pedals at the same time with same foot wink.gif SO one pedal goes off (that was previously on) and other goes on wink.gif

But if you haven't bought pod I suggest you to buy normal flanger pedal , or delay ...Multieffects tend to sound really pour on gigs...They just take so much of your precious sound... cool.gif They make more harm than good wink.gif

Posted by: Marell Dec 11 2007, 03:10 PM

QUOTE (Bogdan @ Dec 11 2007, 02:34 AM) *
Ivan does it all the time wink.gif Its cool wink.gif Just arrange them that you can step on both pedals at the same time with same foot wink.gif SO one pedal goes off (that was previously on) and other goes on wink.gif

But if you haven't bought pod I suggest you to buy normal flanger pedal , or delay ...Multieffects tend to sound really pour on gigs...They just take so much of your precious sound... cool.gif They make more harm than good wink.gif


Ok thanks everybody for help, I'll buy "normal effects" biggrin.gif

Posted by: Milenkovic Ivan Dec 11 2007, 04:55 PM

Delay can maybe be used on gigs from a proc because it does not sound too sintetic (well it does but not TOO sintetic), so focus your budget on good flangin/chorus device, possibly in one pedal.

Posted by: Marell Dec 11 2007, 04:59 PM

QUOTE (Milenkovic Ivan @ Dec 11 2007, 04:55 PM) *
Delay can maybe be used on gigs from a proc because it does not sound too sintetic (well it does but not TOO sintetic), so focus your budget on good flangin/chorus device, possibly in one pedal.


Ok thanks again ;]

Posted by: Marell Dec 11 2007, 05:13 PM

QUOTE (Marell @ Dec 11 2007, 04:59 PM) *
Ok thanks again ;]

Posted by: MickeM Dec 11 2007, 05:15 PM

QUOTE (Marell @ Dec 10 2007, 05:25 PM) *
Thanks guys, but even if I can't do that I'll try to do this: switch effect (exampe flanger to delay on floor pod) one riff before the clean guitar comes in and then turn off MT 2-hope it will work, blink.gif

You could get a line selector so you can manage it with just stepping on one pedal.

On one line you could have

--phaser--MT2--

on the other

--delay--flanger--

Pressing the line selector (just a normal pedal) would switch between those two.

Then you can set it up with three lines since the line selector is sitting between the guitar and amp so you could have f.ex a Wah that's always there no matter which line you choose.

Posted by: Marell Dec 11 2007, 05:48 PM

QUOTE (MickeM @ Dec 11 2007, 05:15 PM) *
You could get a line selector so you can manage it with just stepping on one pedal.

On one line you could have

--phaser--MT2--

on the other

--delay--flanger--

Pressing the line selector (just a normal pedal) would switch between those two.

Then you can set it up with three lines since the line selector is sitting between the guitar and amp so you could have f.ex a Wah that's always there no matter which line you choose.


I am repeating it again and again, but thanks! I need to start saving money wink.gif

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)