Printable Version of Topic

Click here to view this topic in its original format

GMC Forum _ REC _ Take 5: Metal For Rockers!

Posted by: Rammikin Sep 18 2012, 08:18 PM

Original lesson: http://www.guitarmasterclass.net/ls/Metal-For-Rockers/

Ben, I added the missing note you mentioned, and concentrated on letting the non-muted chords ring. Thanks to your help and help I'm getting from Cosmin, I'm hearing things I couldn't hear before.



Links to previous attempts at this lesson:
http://guitarmasterclass.net/guitar_forum/index.php?showtopic=45589
http://guitarmasterclass.net/guitar_forum/index.php?showtopic=45663

Posted by: Cosmin Lupu Sep 19 2012, 09:04 AM

Hello there my friend smile.gif Thanks for the nice thoughts!

This is much better! It's tighter and the timing is better than before. The only part where I can hear there is room for improvement, would be the middle part, where you are still missing some notes because of the speed. Slow the middle part down, play ti perfectly at half the speed and then increase everything to the original tempo smile.gif

C'mon, let's get the 10 wink.gif

Cosmin

Posted by: Gabriel Leopardi Sep 19 2012, 03:11 PM

Hi mate! this take is better than the previous one! It's great to see your evolution being that fast. As Cosmin said, there is some room to improve but now you are closer to 10. Keep on the hard work!

Posted by: Ben Higgins Sep 20 2012, 01:54 PM

You're getting there, man. Notice that you're not quite hitting the 3rd note in the opening riff (is it the 5th fret ?). It's getting lost. Either it's because you're not fretting it long enough or it's because your pick isn't hitting the string properly. Either way, that note is getting lost.

As Cosmin said, you're still missing some open E notes on the middle section from 0:40 onwards, generally before you play the G power chord.

I hope that helps isolate the last little problem areas for you smile.gif

Posted by: Fran Sep 20 2012, 03:59 PM

Really close, 7.3

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)