Is My Amp Ohm Setting Right For My Cab?
guitaro
May 7 2021, 05:51 PM
GMC:er
Posts: 39
Joined: 1-September 13
Just checking over my amp settings and noticed I have my PowerAmp Output setting set to 8 Ohms. Checked the back of my Cabinet and got a bit confused with the Stereo and Mono settings. I only run one speaker cable from one of the amp poweramp outputs to the cabinet so I'm assuming the 8ohm setting on the amp head is correct for my cabinet and application?

The stereo section of the text(2X16ohms) is confusing. Would this be if I had another cabinet and wanted to run two of them at the same time? Or if I set the cabinet to "Stereo" then I would need to set the amp output Ohms to 16? How would this work and what would the benefit of stereo over mono be if only using one cabinet? Thanks heaps in advance.

Attached Image

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post
klasaine
May 7 2021, 06:39 PM
GMC:er
Posts: 4.552
Joined: 30-December 12
From: Los Angeles, CA
You should have at least two ohms choices outputs on the back of your amp head.
Use the 8 ohm for mono and 16 if you want stereo.
Definitely find and read the manual. There will be more info available.
I'll assume that if you use the stereo option in the single cab, you can get more of a dimensional sound with anything that's stereo in the fx loop.

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post
Todd Simpson
May 7 2021, 07:47 PM
GMC:er
Posts: 25.297
Joined: 23-December 09
From: Atlanta, Georgia, USA
If you want stereo, just switch the button to stereo and it should split the signal and give you stereo in one cab. At least that's how mine used to work smile.gif

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post
guitaro
May 8 2021, 03:48 AM
GMC:er
Posts: 39
Joined: 1-September 13
QUOTE (klasaine @ May 7 2021, 05:39 PM) *
You should have at least two ohms choices outputs on the back of your amp head.
Use the 8 ohm for mono and 16 if you want stereo.
Definitely find and read the manual. There will be more info available.
I'll assume that if you use the stereo option in the single cab, you can get more of a dimensional sound with anything that's stereo in the fx loop.


Yeh there are options for 4, 8 and 16ohms. I just wanted to make sure I don't damage anything biggrin.gif

QUOTE (Todd Simpson @ May 7 2021, 06:47 PM) *
If you want stereo, just switch the button to stereo and it should split the signal and give you stereo in one cab. At least that's how mine used to work smile.gif


Thanks! I just wanted to make sure I wasn't damaging anything first biggrin.gif

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post
Gabriel Leopardi
May 8 2021, 04:53 AM
Instructor
Posts: 36.043
Joined: 3-March 07
From: Argentina
Hi mate, I strongly recommend you to check this video. You'll find your answer at 02:40.



You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!


--------------------
My lessons

Do you need a Guitar Plan?
Join Gab's Army

Check my band:Cirse
Check my soundcloud:Soundcloud

Please subscribe to my:Youtube Channel
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 




RSS Lo-Fi Version Time is now: 25th April 2024 - 03:31 PM