Smooth Action, Guitar Fretboards |
|
Smooth Action, Guitar Fretboards |
|
|
|
|
Jul 19 2007, 01:45 PM |
I hear or read alot about the action of a board, but I guess I dont really know what it means. Aren't all boards made the same? Aren't all frets made the same? Don't all guitar makers adhere the frets onto the boards using a certain formula for height? What makes one board smoother or faster than another? And what guitar brands are these verse others that are slow? Action = string height. Low action, faster playability. High action, better tone. Frets. They come in several different sizes. It's the metal pice itself that's measured. Tall frets means you don't have to press so hard before it's a tone, it gives a scalloped feeling. So there's different sizes in height and width and they go by different names like Jumbo frets, 6105 etc. I don't know the sizes by heart. Wide frets, well... for sausage fingers maybe? -------------------- My bands homepage
All time favourites: B. Streisand - Woman in Love, M. Hopkin - Those were the days, L. Richie - Hello |
|
|
||
|
|
|
Jul 19 2007, 06:43 PM |
The feel of a fret changes according to its height and width, or gauge. Also the fret may be profiled/crowned so as to be flatter on the top or more conical. What you like is really quite subjective. Also most guitars use the same gauge the length of the board, some use graduated frets where the gauge is slowly altered as you go along the board. As MickeM says tall frets give a scalloped type feel (bit like Malmsteem's partly scalloped neck though he has the neck shaved behind the top frets to achieve this). As I remember it scalloping though can lead to the note going sharp if you press to hard?
The feel of the neck can change according to the type of wood used for the fretboard and any finish. I prefer ebony with an open/untreated grain (but its nowadays hard to get) but many guitarists seem to favour the Fender type laquered maple and some claim its faster. For faster though I'd think its more to do with the profile of the neck than its finish. Lots of players say that Ibanez have great neck profiles for speed. My guitars have a more Gibson profile - not as fast as an Ibanez neck but it's what I've got used to. I find it difficult to switch to a non-Gibson neck, have to take time to adjust to the different scale length, neck width etc. Interestingly I read that Vai thinks he's so used to his Jems that he struggles to play a guitar with a different neck profile (his words not mine though I think his idea of struggling may be different to my actual struggling). Could be the only bit of guitar technique that I come close to him on though . Cheers, Tony -------------------- Get your music professionally mastered by anl AES registered Mastering Engineer. Contact me for Audio Mastering Services and Advice and visit our website www.miromastering.com
Be friends on facebook with us here. We use professional, mastering grade hardware in our mastering studo. Our hardware includes: Cranesong Avocet II Monitor Controller, Dangerous Music Liasion Insert Hardware Router, ATC SCM Pro Monitors, Lavry Black DA11, Prism Orpheus ADC/DAC, Gyratec Gyraf XIV Parallel Passive Mastering EQ, Great River MAQ 2NV Mastering EQ, Kush Clariphonic Parallel EQ Shelf, Maselec MLA-2 Mastering Compressor, API 2500 Mastering Compressor, Eventide Eclipse Reverb/Echo. |
|
|
||