My First Dyi Pedal! |
|
My First Dyi Pedal! |
|
|
|
|
Aug 2 2009, 09:05 PM |
Just finished putting together my first pedal, and it actually works!
I'm fairly experienced with soldering but it's been a while since i last held the iron, so i thought i would start with something relatively easy. I went with the Dual foot switch Feedback Looper Kit from RoadRage There's no PCB so it was kinda hard to mess things up, but still.. quite pleased with myself The loop-switcher does what it should do, and the feedback looper is just insanely nutty. I'll have some soundclips up soon Oh, and the topic should say "DIY". Seems like you cant edit topics This post has been edited by Trond Vold: Aug 2 2009, 09:07 PM -------------------- Guitars: Schecter Stiletto Classic, Jackson SLSMG, Ibanez RG-380 Japan, Gibson Les Paul Studio
Amp: Marshall JMP-1 -> Rocktron Velocity 100 -> Marshall JCM-900 Lead 4x12 FX and stomps: T.C Electronics G-Sharp, Korg SDD-1200, Emma Transmorgrifier, BYOC Tribooster, GGG Green Ringer, Dinosaur Overdrive, Voodoo Lab SuperFuzz, Sovtek Bassballs, Line6 Tap Tremolo, EHX Screaming Bird. ___________________________________________________ My Lessons! My Instructor Board! My Myspace! |
|
|
||
|
|
|
Aug 2 2009, 09:48 PM |
Looks great Trond . Was it easy to put together for a complete newbee? Any chance that you can post some audio clips of it mate? (sorry for asking lots of questions but it does look like a fun thing to do .)
-------------------- Get your music professionally mastered by anl AES registered Mastering Engineer. Contact me for Audio Mastering Services and Advice and visit our website www.miromastering.com
Be friends on facebook with us here. We use professional, mastering grade hardware in our mastering studo. Our hardware includes: Cranesong Avocet II Monitor Controller, Dangerous Music Liasion Insert Hardware Router, ATC SCM Pro Monitors, Lavry Black DA11, Prism Orpheus ADC/DAC, Gyratec Gyraf XIV Parallel Passive Mastering EQ, Great River MAQ 2NV Mastering EQ, Kush Clariphonic Parallel EQ Shelf, Maselec MLA-2 Mastering Compressor, API 2500 Mastering Compressor, Eventide Eclipse Reverb/Echo. |
|
|
||
|
|
|
Aug 2 2009, 09:58 PM |
Looks great Trond . Was it easy to put together for a complete newbee? Any chance that you can post some audio clips of it mate? (sorry for asking lots of questions but it does look like a fun thing to do .) If your going to attempt a kit, then i really recommend starting with one like this. A simple loopswitcher, a/b box or similar. They usually dont involve a PCB or a ton of small components. It was fairly easy actually, the trickiest part is working in a very confined enclosure. There's not a lot of room for the soldering iron in there, so it's easy to burn off another wire. I'll have a soundclip up with some crazy feedback sounds in a bit -------------------- Guitars: Schecter Stiletto Classic, Jackson SLSMG, Ibanez RG-380 Japan, Gibson Les Paul Studio
Amp: Marshall JMP-1 -> Rocktron Velocity 100 -> Marshall JCM-900 Lead 4x12 FX and stomps: T.C Electronics G-Sharp, Korg SDD-1200, Emma Transmorgrifier, BYOC Tribooster, GGG Green Ringer, Dinosaur Overdrive, Voodoo Lab SuperFuzz, Sovtek Bassballs, Line6 Tap Tremolo, EHX Screaming Bird. ___________________________________________________ My Lessons! My Instructor Board! My Myspace! |
|
|
||
|
|
|
Aug 2 2009, 10:53 PM |
Ok, here's a little soundclip. Be warned, this isnt exactly anything resembling "music". (There's also some REALLY high frequencies).
The point is to have several fx-unit feedbacking into eachother creating uncontrollable sounds and noise. For this test i only used a Big Muff and a little delay unit (with flanger/chorus modulation). uhm.mp3 ( 3.87MB ) Number of downloads: 172 -------------------- Guitars: Schecter Stiletto Classic, Jackson SLSMG, Ibanez RG-380 Japan, Gibson Les Paul Studio
Amp: Marshall JMP-1 -> Rocktron Velocity 100 -> Marshall JCM-900 Lead 4x12 FX and stomps: T.C Electronics G-Sharp, Korg SDD-1200, Emma Transmorgrifier, BYOC Tribooster, GGG Green Ringer, Dinosaur Overdrive, Voodoo Lab SuperFuzz, Sovtek Bassballs, Line6 Tap Tremolo, EHX Screaming Bird. ___________________________________________________ My Lessons! My Instructor Board! My Myspace! |
|
|
||
|
|
|
Aug 3 2009, 07:49 AM |
lol! Eighties video game to the max!
|
|
|
||
|
|
|
Aug 3 2009, 10:49 AM |
Lol what a crazy sounding pedal! heheh
Congrats on putting it all together! -------------------- For GMC support please email support (at) guitarmasterclass.net
Check out my lessons and my instructor board. Check out my beginner guitar lessons course! ; Take a bass course now! |
|
|
||
|
|
|
Aug 3 2009, 01:28 PM |
Awesome Trond!!!!
I think I might have a go at one of those myself now!!! -------------------- I'd rather have a full Bottle in front of me than a full Frontal Lobotomy!!
|
|
|
||
|
|
|
Aug 3 2009, 08:32 PM |
Ok, here's a little soundclip. Be warned, this isnt exactly anything resembling "music". (There's also some REALLY high frequencies). The point is to have several fx-unit feedbacking into eachother creating uncontrollable sounds and noise. For this test i only used a Big Muff and a little delay unit (with flanger/chorus modulation). uhm.mp3 ( 3.87MB ) Number of downloads: 172 Cool job! I once tried to make one, a fuzz pedal. For that thing, you need to solder a PCB (I think), you have this piece of coper with strokes on it, and you have to insert all the parts (diodes and resistors... etc.) in the right hole, then solder it on it's place, but solder it very neat in order not to het another stroke.... It was to hard I screwed up twice and then threw it away. Waste of money it looked like this: http://img223.imagevenue.com/img.php?image..._122_452lo.JPG# It's a picture of my mom holding it, just to show how small it was... and how I screwed up xD you can see it's very "not neat" It was fairly easy actually, the trickiest part is working in a very confined enclosure. There's not a lot of room for the soldering iron in there, so it's easy to burn off another wire. Why didn't you solder first, then put into the enclosure? |
|
|
||
|
|
|
Aug 3 2009, 08:45 PM |
Cool job! I once tried to make one, a fuzz pedal. For that thing, you need to solder a PCB (I think), you have this piece of coper with strokes on it, and you have to insert all the parts (diodes and resistors... etc.) in the right hole, then solder it on it's place, but solder it very neat in order not to het another stroke.... It was to hard I screwed up twice and then threw it away. Waste of money it looked like this: http://img223.imagevenue.com/img.php?image..._122_452lo.JPG# It's a picture of my mom holding it, just to show how small it was... and how I screwed up xD you can see it's very "not neat" Why didn't you solder first, then put into the enclosure? Thanks Soldering takes alot of practice.. i've seen far worse first-attempt PCB's than yours. Most components can offcourse be soldered outside the enclosure, but certain connections is hard to judge the length to outside of it. An important thing is not having too much and too long wires in the box. Correctly sized wires makes seeking for potential errors easier in my opinion. -------------------- Guitars: Schecter Stiletto Classic, Jackson SLSMG, Ibanez RG-380 Japan, Gibson Les Paul Studio
Amp: Marshall JMP-1 -> Rocktron Velocity 100 -> Marshall JCM-900 Lead 4x12 FX and stomps: T.C Electronics G-Sharp, Korg SDD-1200, Emma Transmorgrifier, BYOC Tribooster, GGG Green Ringer, Dinosaur Overdrive, Voodoo Lab SuperFuzz, Sovtek Bassballs, Line6 Tap Tremolo, EHX Screaming Bird. ___________________________________________________ My Lessons! My Instructor Board! My Myspace! |
|
|
||
|
|
|
Aug 8 2009, 05:36 PM |
Man, that's crazy stuff, I like it it's interesting! Congrats Trond, I wish I could solder nice so I can build them, I'm going to try to practice with the iron a bit
-------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
||