Printable Version of Topic

Click here to view this topic in its original format

GMC Forum _ GEAR & PRODUCTION _ General Midi Question

Posted by: daimeon Nov 25 2009, 11:53 AM

Hi,
I'm really new to Midi Controllers and so here are a few Newbiequestions:

Let's assume I got the following setup:

- Behringer FCB 1010 (Midi Controller)
- Line6 Pod X3
- Digitech Whammy4

Is it possible to use the FCB 1010 to activate the Line6's Delay/Phaser/Whatever AND the Whammy's Octave Up functions simultaneously with just one button?
If so how do I connect these devices?
the FCB and the POD both have Midi-IN and Midi-OUT, but the Whammy just has Midi-IN

I don't need a complete tutorial on how to do this, just cable-management and a hint how to programm this.

Thanks in advance,
Daniel

Posted by: Staffy Nov 25 2009, 12:17 PM

QUOTE (daimeon @ Nov 25 2009, 11:53 AM) *
Hi,
I'm really new to Midi Controllers and so here are a few Newbiequestions:

Let's assume I got the following setup:

- Behringer FCB 1010 (Midi Controller)
- Line6 Pod X3
- Digitech Whammy4

Is it possible to use the FCB 1010 to activate the Line6's Delay/Phaser/Whatever AND the Whammy's Octave Up functions simultaneously with just one button?
If so how do I connect these devices?
the FCB and the POD both have Midi-IN and Midi-OUT, but the Whammy just has Midi-IN

I don't need a complete tutorial on how to do this, just cable-management and a hint how to programm this.

Thanks in advance,
Daniel


To make this work, You must be able to map the program change numbers on both the Line6 AND the whammy (or at least at one of them), if You send pr.change nr. 24 from the controller for instance - the device must map this to the actual preset/sound You like to have.....

//Staffay

Posted by: Daniel Realpe Nov 25 2009, 06:19 PM

I've only used MIDI on the POD to store some presets on the PC, not sure if you can do that with a controller,


Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)