Hi folks,
I recently bought a classic series 50s MIM strat and was hoping someone could advise about the pickup config.
As I understand it the three single coil pickups are identical.
The selector switch is standard:
1
bridge
2 bridge/middle
3 middle
4 neck/middle
5 neckThe bridge pickup is RWRP meaning that position 2 is noise cancelling, but position 4 is not.
I'm thinking, if the above is all true, I could physically swap bridge + middle pickups and swap their wiring points too, giving me the more conventional RWRP in the middle and noise cancelling on positions 2+4.
Can anyone confirm this is right, or tell me why it's not?
Is there any disadvantage or reason I wouldn't want to do this.
The guitar is exclusively for studio use so having the two noise cancelling positions would be a real benefit.
Many thanks in advance.
You are at GuitarMasterClass.net
Don't miss today's
free lick. Plus all our lessons are packed with
free content!
This post has been edited by steenamaroo: Nov 10 2015, 04:41 AM