Axe Fx Ultra Problem, Sympathise with me |
|
Axe Fx Ultra Problem, Sympathise with me |
|
|
|
|
Mar 21 2012, 02:08 PM |
One of the draw backs of an all in one unit like this is when problems occur you are left floundering a little
Problem Midi Light stays on and patch 001 is selected no matter what I press on my Ground Control Pro. Can change patch via Axe Fx ok Configuration Ground Control power supply is connected to the Axe Fx phantom power socket, the Ground Control is powered via the Axe Fx by a 7 pin Midi cable Trouble shooting 1- Unplug GCP - Light goes out. - Plug back in Light comes back on 2- Disconnect every cable incl all power cables and plug in again- Light comes back on 3 - Wipe memory on GCP - No change 5 - Try a 5 pin Midi cable and power GCP directly - All OK 6 - Try 7 pin Midi Cable and power GCP directly - All OK Conclusion Power pin on either, cable or one of the sockets is shorting to a Midi signal pin. I shall meter them out tonight and hope it's the cable and not a socket problem or something worse. Does my logic make sense to anyone else, have I missed any other step? -------------------- My SoundCloud
Gear Tyler Burning Water 2K Burny RLG90 with BK Emeralds Fender US Tele with BK Piledrivers Epiphone 335 with Suhr Thornbuckers PRS SE Custom 24-08 Ax8 Fessenden SD10 PSG Quilter TT15 |
|
|
||
|
|
|
Mar 21 2012, 03:39 PM |
Did you browse through Here?
Most the solutions people look for regarding the axe fx is here. It's one of my favourite pages on the internet |
|
|
||
|
|
|
Mar 21 2012, 04:53 PM |
I've been on the forum and emailed both Fractal and G66.
I came to my conclusion before I recieved an email back from both so updated both with what I found. I really hope it's just the midi cable, -------------------- My SoundCloud
Gear Tyler Burning Water 2K Burny RLG90 with BK Emeralds Fender US Tele with BK Piledrivers Epiphone 335 with Suhr Thornbuckers PRS SE Custom 24-08 Ax8 Fessenden SD10 PSG Quilter TT15 |
|
|
||
|
|
|
Mar 21 2012, 10:36 PM |
I had the same problem midi cable was bad I got a new one and it fixed the problem!
I hope there is nothing major! -------------------- |
|
|
||
|
|
|
Mar 22 2012, 06:42 PM |
I metered the cable and one of the power pins was shorted to a signal pin.
-------------------- My SoundCloud
Gear Tyler Burning Water 2K Burny RLG90 with BK Emeralds Fender US Tele with BK Piledrivers Epiphone 335 with Suhr Thornbuckers PRS SE Custom 24-08 Ax8 Fessenden SD10 PSG Quilter TT15 |
|
|
||