Pod X3 Dry Signal |
|
Pod X3 Dry Signal |
|
|
|
|
Jan 3 2009, 12:54 AM |
FROM THE MANUAL:
Recording Tone 1 & 2 to Separate Mono Tracks 1. Connect outputs to your recorder: • POD X3: connect the 1/4-inch outs. • POD X3 Live & POD X3 Pro: the XLR outputs are recommended for live sound systems, to provide a level that approximately matches a mic’ed up amp. You can also use them for recording into mic preamps, or use the 1/4-inch outputs to get hotter, line level outputs. 2. Set the second OUTPUTS page (Studio/Direct Mix): • Tone 1: On • Tone 1 Pan: pan left • Tone 2: On • Tone 2 Pan: pan right 3. When using the 1/4-inch jacks, also set the first OUTPUTS page (1/4-inch): • Mode: MATCH STUDIO/DIRECT 4. In your recording system, assign those outputs to separate recording tracks. Hope it helps mate. In Sonar you should make 2 separate mono audio tracks and choose the source like this: TRACK 1 - LEFT TRACK 2 - RIGHT -------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
||