Hey GMC,
My friend plays bass, and currently has a 4-string bass. He was wondering if he could get a pack of strings for a 5-string bass and put the lower 4 strings on his bass. I think that he would have to file down the nut to accommodate the thicker strings, or make adjustments to the truss rod, but I'm pretty sure it'd work after that.
I know Bogdan here plays bass, but if any of you have any experience with this, please let me know! Thanks
Hi mate, I don't have experience with Bass strings but I think that you will have to calibrate the bass if you want to use another thickness. Let's see what Bogdan says about this.
I don't know anyone who did this but it all depends on the string thickness (gauge).
If the lowest (E string) is somewhere between 90-110 maybe even 120, he'll probably be able to fit it in. Or he could also skip the thickest string from the 5 string set, all again depending on the gauge of the set.
Not sure how economic this would be as 5 string sets are more expensive and 4 string set on a 4 string bass will always be more balanced.
Bogdan hit it on the head of course Essentially you are trying to string the bass with strings that were not designed for it. Basically much thicker strings. The problem you may run in to is INADEQUATE SCALE LENGTH.
E.G. THe neck is just too short to provide adequate tension to the strings. The best thing to do is simply to try it though and see how it goes
Todd
I have a friend that does this with his Rickenbacker.
I'm not sure if the nut needed filing for it to fit.
To my ears, the bottom notes of the B string don't sound quite 'right', as if there's a wolf tone or the intonation is a bit off.
Perhaps the bridge doesn't have enough adjustment range to accommodate such a thick string.
Or maybe the amp being used couldn't cope with such a low note.
Be very careful when tweaking the truss rod to slacken the strings off before doing so.
You can get away with it on guitars but there's generally much more tension on a bass neck and it's possible for the truss rod to snap or the threads to strip.
I learned this to my cost a long time ago!
EDIT - I don't see that the tension on the neck should be much different, whether the 4 string bass is strung with the top 4 or bottom 4 strings of a 5 string set, as each string is likely to be about the same tension.
Whereas 5 string basses need stronger necks due to having all 5 strings, so about 25% more tension to counteract.
Pete
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)