Printable Version of Topic

Click here to view this topic in its original format

GMC Forum _ REC _ (8.25, Pass) Beginner's Corner 21: String Bending

Posted by: carminemarotta Apr 15 2012, 03:40 PM

Original lesson: http://www.guitarmasterclass.net/ls/Beginners-Corner-21-String-Bending/ by http:///instructor/Bear-Rose

Dear Instructors,
here my first take with bending. Wait for your comments
(yes Alex, I am practcing with the tuner biggrin.gif )
Carmine


Posted by: Sinisa Cekic Apr 15 2012, 11:48 PM

Nice shot Carmine ! Bending is just fine, accurate and balanced pitch, but what reduces the final impression is the transition between the two bends. You must try to get this transition a little more flowing and relaxed ! A simple solo line with a bend at the end - there's nothing more beautiful ! Keep a good work wink.gif

Posted by: Gabriel Leopardi Apr 16 2012, 06:00 AM

Hi Carmine! Those bends sound very good! You reach the correct pitch in most of them. Once again I have to say that if you could put the backing track a bit higher we could analyse better your timing and playing in general. By the way I think that you are on the right track with this one. Keep on the good job! wink.gif

Posted by: Cosmin Lupu Apr 16 2012, 01:07 PM

Hey Carmine, Gabe is right - the backing should be louder, but out of what I can deduct, you are pretty close with the timing in most of the places and the bends are in pitch smile.gif

Maybe another take, where you would focus on the timing a bit more, would bring up better results and a step forward for you smile.gif

Cosmin

Posted by: Alex Feather Apr 16 2012, 05:00 PM

Very very nice!!! I can see such a huge progress on your bending!!!!!
Most of them were perfect and you did very good!
It would be much easier if you will turn backing track up, but as far as I heard your timing was pretty good!
Good job!!!!
(See tuner works smile.gif )

Posted by: skennington May 7 2012, 07:40 PM

8.25 on this lesson

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)