Multi Meter Ground Issue?
onetabmat
May 5 2019, 03:31 PM
Learning Roadie
Posts: 292
Joined: 30-July 18
From: UK
Hi I’m having some ground issues with my wiring on my build and will probably need to meter it to find the fault, if I were to use a multi meter how do I find it? I’ve never used one.
From what I’ve seen I’ll need to check continuity for ground.
Do I place black on output sleeve and red tip on part testing?
Do I look for anything other than 0l? Not sure what I’m looking for?
Thanks in advance

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
Adam
May 5 2019, 04:47 PM
Learning Roadie
Posts: 1.045
Joined: 13-October 18
From: Poland
QUOTE (onetabmat @ May 5 2019, 03:31 PM) *
Hi I’m having some ground issues with my wiring on my build and will probably need to meter it to find the fault, if I were to use a multi meter how do I find it? I’ve never used one.
From what I’ve seen I’ll need to check continuity for ground.
Do I place black on output sleeve and red tip on part testing?
Do I look for anything other than 0l? Not sure what I’m looking for?
Thanks in advance

I'm not sure what you mean here. Do you suspect one of the solders is loose or that you're lacking grounding one of the elements?

Please let me know what problem exactly you're having and I'll try to help smile.gif

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!


--------------------
Go to the top of the page
 
+Quote Post
onetabmat
May 5 2019, 05:41 PM
Learning Roadie
Posts: 292
Joined: 30-July 18
From: UK
QUOTE (Adam M @ May 5 2019, 04:47 PM) *
I'm not sure what you mean here. Do you suspect one of the solders is loose or that you're lacking grounding one of the elements?

Please let me know what problem exactly you're having and I'll try to help smile.gif


All wired up correctly. But there is buzzing/hum .
If I touch 3 way switch or cavity shielding the hum goes away.
All parts grounded to vol back including one from the bridge .


You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post
Adam
May 5 2019, 06:15 PM
Learning Roadie
Posts: 1.045
Joined: 13-October 18
From: Poland
QUOTE (onetabmat @ May 5 2019, 05:41 PM) *
All wired up correctly. But there is buzzing/hum .
If I touch 3 way switch or cavity shielding the hum goes away.
All parts grounded to vol back including one from the bridge .

Could you provide a photo or a schematic of your cavity? I've had the same thing with my brother's Washburn's stock wiring. Turned out there was a ground loop (if that's the right English term). I just re-wired the whole thing and the problem was gone.

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!


--------------------
Go to the top of the page
 
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 




RSS Lo-Fi Version Time is now: 25th April 2024 - 01:19 PM