Heavy Buzz!
kaznie_NL
Dec 2 2010, 09:56 PM
Experienced Tone Seeker
Posts: 4.809
Joined: 8-December 07
From: Hedel, Netherlands
Hey GMC!

I recently installed some new pickups in my Les Paul, the so called Rocksong set from Tonerider. Tonerider is supposed to be just as good as Dimarzio and SD, but half the price! I've got myself the set, all was well, and I installed them. For some reason the bridge pickup seemed to have les output then the neck, even after resoldering. I adjusted the height of the pickups a bit to match it, but I guess now it's a bit to close to the strings.

Now the problem tongue.gif I've got some major buzz! When I touch the strings, there's no problem and there's no buzz, but when I don't touch it at all it's buzzy as hell tongue.gif Only turning the volume to 0 helps then. This is for both the neck and the bridge pickup. I think I've wired and soldered them correctly, they're being grounded.


What could be the problem? Should I double check the grounding?

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!


--------------------
My YouTube Channel Here

My Rec Takes Here


--- GEAR ---
Ibanez SA08LTD2 BAR
Vox AD50VT
Pod Farm
Line 6 Pod Studio GX
El Cheapo Strat
Dunlop Slide
Korg Toneworks AX5G
Go to the top of the page
 
+Quote Post
MickeM
Dec 2 2010, 10:21 PM
Born of NWOBHM, Moderation Team Leader
Posts: 8.562
Joined: 9-January 07
From: Stockholm, Sweden
Since there should be no buzz from humbuckers and you already checked the grounding I'd start looking for bad soldering and resolder all the suspects.
If that doesn't help it's even possible a pot was damaged while heated.

Hope that helps.

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post
-Zion-
Dec 3 2010, 12:35 AM
Learning Roadie
Posts: 713
Joined: 20-May 08
From: copenhagen
Hi kaz..

good to see you are taking pickups into your own hands.. i remember an old discussion about soldering some time ago.. biggrin.gif

Anyways, I think it's a grounding issue.. I have similar problems myself, and at some point, when i have the time, i will rip out everything and do it really nice and foxy.. Hopefully this will help my buzzing..

until then though.. buzz buzz buzz.. i need a buzzkill.. lol

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 




RSS Lo-Fi Version Time is now: 24th November 2020 - 12:01 AM