Help With Ofr =)

ssss

Posting Guidelines

GMC Forum > Discussion Boards > GEAR & PRODUCTION

Help With Ofr =)

atomix1337 View Member Profile	Jul 26 2007, 01:02 AM
Jul 26 2007, 01:02 AM	GMC:er Posts: 97 Joined: 4-July 07 From: Louisiana, USA	Restoring my old RG ... =) Does anyone know if i can order a new OFR Mounting Thingy for the actual (screw in) Trem Arm? I know they can be replaced, and i don't wanna buy the whole plate, if i can even do that. If someone knows a part number, please let me know where i can order this! Or if anyone has an old OFR that can sell me this little peice. OFR = Original Floyd Rose, for any confusion that may take place You are at GuitarMasterClass.net Don't miss today's free lick. Plus all our lessons are packed with free content! Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content! This post has been edited by atomix1337: Jul 26 2007, 01:02 AM -------------------- Gear: Ibanez VBT700BK, Ibanez RG270 Custom Painted (JB/Jazz pups), Strat Knockoff, Marshall V8080, Boss GE-7 EQ, Boss MT-2, Boss CH-1 Chorus, Korg AX1G MultiFX.

Saoirse O'Shea View Member Profile	Jul 26 2007, 01:19 AM
Jul 26 2007, 01:19 AM	Moderator - low level high stakes Posts: 6.173 Joined: 27-June 07 From: Espania - Cadiz province	Not too sure which bit you mean atomix but floyd rose are usually ok to get parts for . This might help Warmoth floyd rose spares Cheers, Tony You are at GuitarMasterClass.net Don't miss today's free lick. Plus all our lessons are packed with free content! Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content! -------------------- Get your music professionally mastered by anl AES registered Mastering Engineer. Contact me for Audio Mastering Services and Advice and visit our website www.miromastering.com Be friends on facebook with us here. We use professional, mastering grade hardware in our mastering studo. Our hardware includes: Cranesong Avocet II Monitor Controller, Dangerous Music Liasion Insert Hardware Router, ATC SCM Pro Monitors, Lavry Black DA11, Prism Orpheus ADC/DAC, Gyratec Gyraf XIV Parallel Passive Mastering EQ, Great River MAQ 2NV Mastering EQ, Kush Clariphonic Parallel EQ Shelf, Maselec MLA-2 Mastering Compressor, API 2500 Mastering Compressor, Eventide Eclipse Reverb/Echo.

atomix1337 View Member Profile	Jul 26 2007, 01:26 AM
Jul 26 2007, 01:26 AM	GMC:er Posts: 97 Joined: 4-July 07 From: Louisiana, USA	QUOTE (tonymiro @ Jul 26 2007, 01:19 AM) Not too sure which bit you mean atomix but floyd rose are usually ok to get parts for . This might help Warmoth floyd rose spares Cheers, Tony Gotcha, silly looking paint diagram incoming!.... This devious little piece screws on using a hex screw (allen screw thing) from the UNDERNEATH of the main bridge plate. It's GOTTA be replacable You are at GuitarMasterClass.net Don't miss today's free lick. Plus all our lessons are packed with free content! Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content! -------------------- Gear: Ibanez VBT700BK, Ibanez RG270 Custom Painted (JB/Jazz pups), Strat Knockoff, Marshall V8080, Boss GE-7 EQ, Boss MT-2, Boss CH-1 Chorus, Korg AX1G MultiFX.

Evan View Member Profile	Jul 26 2007, 04:49 AM
Jul 26 2007, 04:49 AM	GMC:er Posts: 39 Joined: 8-June 07 From: Daytona Beach, Florida, USA	Yes, it's replaceable. In fact, I've replaced this part along with the bar itself on some licensed floyd rose copies and it made all the difference in the world. Many copies of the floyd rose are pretty good, except the bar itself is loose, rough, or just feels sloppy. Changing this part ends those problems completely -I highly recommend this if you have problems with the bar on a floyd copy. In the past, a new floyd rose arm would come with the threaded 'barrel', the hex screw that goes on the back, and the bar itself as a set. I'm not sure it's still sold this way, but maybe you could call or email floyd rose to find out. Btw, my floyd rose book says to use vaseline to lube this part with, but it will wear out too fast if you use that. Gun oil or lithium soap base grease will make it last longer and feel waaayyy better! I use gun oil, because it's cheaper and less of a mess and you can also use it to clean your trem just by letting it soak in it. You are at GuitarMasterClass.net Don't miss today's free lick. Plus all our lessons are packed with free content! Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!

atomix1337 View Member Profile	Jul 27 2007, 04:00 PM
Jul 27 2007, 04:00 PM	GMC:er Posts: 97 Joined: 4-July 07 From: Louisiana, USA	QUOTE (Evan @ Jul 26 2007, 04:49 AM) Yes, it's replaceable. In fact, I've replaced this part along with the bar itself on some licensed floyd rose copies and it made all the difference in the world. Many copies of the floyd rose are pretty good, except the bar itself is loose, rough, or just feels sloppy. Changing this part ends those problems completely -I highly recommend this if you have problems with the bar on a floyd copy. In the past, a new floyd rose arm would come with the threaded 'barrel', the hex screw that goes on the back, and the bar itself as a set. I'm not sure it's still sold this way, but maybe you could call or email floyd rose to find out. Btw, my floyd rose book says to use vaseline to lube this part with, but it will wear out too fast if you use that. Gun oil or lithium soap base grease will make it last longer and feel waaayyy better! I use gun oil, because it's cheaper and less of a mess and you can also use it to clean your trem just by letting it soak in it. But where do i get it ? (The piece ? ) You are at GuitarMasterClass.net Don't miss today's free lick. Plus all our lessons are packed with free content! Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content! -------------------- Gear: Ibanez VBT700BK, Ibanez RG270 Custom Painted (JB/Jazz pups), Strat Knockoff, Marshall V8080, Boss GE-7 EQ, Boss MT-2, Boss CH-1 Chorus, Korg AX1G MultiFX.

Evan View Member Profile	Jul 27 2007, 08:56 PM
Jul 27 2007, 08:56 PM	GMC:er Posts: 39 Joined: 8-June 07 From: Daytona Beach, Florida, USA	QUOTE (atomix1337 @ Jul 27 2007, 11:00 AM) But where do i get it ? (The piece ? ) Stewart MacDonald guitarpartsdepot.com -that's just two, I'm sure there's more places where you can get it like ebay. You can't buy just the barrel piece by itself -it only comes as a set when you buy a replacement arm or bar, but the price isn't too bad. You are at GuitarMasterClass.net Don't miss today's free lick. Plus all our lessons are packed with free content! Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!

« Next Oldest · GEAR & PRODUCTION · Next Newest »

Reply to this topic

Start new topic

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)

0 Members:

Blues Lick Of The Day!

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

Lo-Fi Version

Time is now: 24th April 2024 - 02:52 AM