Marshall Vs100 Tube Change Options

[holoshreder]

i was wondering i could i change the pre amp tube on my marshall vs100
because i dont have a clue how to do it

i got a new fender 12ax7/7025 russian

can anyone help me?

You are at GuitarMasterClass.net

Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!

[Noangels]

as far as I am aware you just take out the old pre amp tubes and replace with other ones-I have swapped and changed preamp tubes on a few amps and preamps with no hassles.As long as both tubes are the same make when replacing it should be fine and sound good-Just make sure to unplug the amp from the mains.I also use gloves when handling tubes,dont know why but i do!

You are at GuitarMasterClass.net

Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!

[Ivan Milenkovic]

I also use gloves when handling tubes,dont know why but i do!

It is good to use gloves, because the grease from the skin is not good for the tubes that are hot. It may not damage the tube, but it is best to keep the glass clean.

You are at GuitarMasterClass.net

Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!