Live Sound, ever recorded it or mastered it? |
|
Live Sound, ever recorded it or mastered it? |
|
|
|
|
Nov 30 2011, 10:16 PM |
I've recorded and mastered quite a few live shows, they were all done in amateurish ways, but I learned a lot from these experiences. It's great to have a dry stereo mix from a mixer, and audio from a cam. Here's a question then:
What do you think are pros/cons of a camera recording and what are those from a mixer? -------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
||
|
|
|
Nov 30 2011, 10:21 PM |
Way out of my league. I'll be interested to hear what you guys have to say about it.
|
|
|
||
|
|
|
Dec 1 2011, 02:17 AM |
Some guys recorded a show of my band in 16 channels. Then I mixed and mastered it. The only thing that I regret is that we didn't have a mic from the audience so I had to use the sound get from some amateur cameras from the audience.
I shared this video some time ago but this is the final mix... -------------------- My lessons
Do you need a Guitar Plan? Join Gab's Army Check my band:Cirse Check my soundcloud:Soundcloud Please subscribe to my:Youtube Channel |
|
|
||
|
|
|
Dec 1 2011, 12:02 PM |
Not broadcast video but I've done both off line and real time mixing and mastering of live shows both for broadcast and for CDA etc. (At the moment we have a multipart job - part is to to master off line a Choral CD and the other part is to do a real time mix for a live broadcast of the same choral work.)
For realtime we take a feed off the house console to our own ADC and then into our daw etc. That way we aren't in the way of the house PA engineer and we can do what we want without affecting the FOH mix. We run sadie here so we can do realtime non-destructive editing as the feed is coming in. With stuff going to air direct we also have to run out through addiitional hardware so that we can put the feed on a delay and so be able to take out anyone swearing etc. We also keep the levels more conservative and the crest much higher for broadcast to help avoid hypercompression and cascading as the signal is often encodied to compressed digital prior to immediate broadcast to save bandwidth. Taking a feed from the FoH console normally has an advantage that it should be high quality and you can decide on where you tap to take your submix. If we need more width then we usually talk to the FoH engineer about how s/he is going to mic i.e. with a Decca tree form etc or not, depending on the room. This usually more than helps improve audience/ambience sufficiently well so as to not require additional micing from some other source. We also usually tend to work on a 'set once and leave alone' approach to EQ etc., as most of our time on a realtime is taken up in editing. TBH in this scenario having to blend in an addiional and very different source would be a real pain - lots of different issues to think about ranging from tonality through to timing through to formats, connections etc. and much more to possibly go wrong. Off line is considerably easier, particularly on your nerves, but with any live recording I find that at mastering I end up having to do a huge number of edits to remove unwanted ambient noise. We also have much more time to EQ and trim as necessary, so offline blending in a different source isn't an issue. Some of the off line stuff we (and others) do aren't a single take anyway but a blend of sessions recording at different times. -------------------- Get your music professionally mastered by anl AES registered Mastering Engineer. Contact me for Audio Mastering Services and Advice and visit our website www.miromastering.com
Be friends on facebook with us here. We use professional, mastering grade hardware in our mastering studo. Our hardware includes: Cranesong Avocet II Monitor Controller, Dangerous Music Liasion Insert Hardware Router, ATC SCM Pro Monitors, Lavry Black DA11, Prism Orpheus ADC/DAC, Gyratec Gyraf XIV Parallel Passive Mastering EQ, Great River MAQ 2NV Mastering EQ, Kush Clariphonic Parallel EQ Shelf, Maselec MLA-2 Mastering Compressor, API 2500 Mastering Compressor, Eventide Eclipse Reverb/Echo. |
|
|
||
|
|
|
Dec 1 2011, 01:58 PM | ||
|
||