Studio Monitors |
|
Studio Monitors |
|
|
|
|
Oct 25 2011, 02:13 PM |
Not really mate, but it all comes down on the function of the room. If the room is intended for recording (drums, amplifiers, vocals etc), then it needs to be isolated from external noise and internal sounds should be more or less isolated, so they don't leak outside too much (because the mixing/tracking room is usually near recording room, so for example: you could not track properly the drummer playing loud, if you can hear him banging in the same time from the other room).
If the room is intended for mixing only, then it doesn't really need isolation of that kind, but still the sound must be tamed within the room, which means the sound reflection artifacts should be minimal: flutter echo, standing waves and bass booms in corners present biggest problems is such rooms and should be handled first. Usually people start by adding small absorbent plates behind the speakers and opposite parts of the room from where the speaker is. This cleans up the sound a bit, reducing the reflections that get in the way. Hard and big flat surfaces should be avoided in rooms where good sound image is needed. -------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
||