Klon Centaur

UNDER CONSTRUCTION

An article by Yoncopin

Making the Klon Centaur

Here are a few of the details of what I put together. First, the layout was my standard stripboard, using this design Klon Centaur Silver Edition

I'm going to guess what Todd refers to as the secret sauce is probably the germanium diodes. The design called for a Russian D9E, but I used 1N34's as the original creator eventually revealed were used in the original. Here's some background on silicon vs germanium diodes

Next, I laid out the enclosure in Sketchup.

I almost always do this now, because it's quick and I make sure everything will fit before drilling. Below is the drilled enclosure after I applied the laser waterslide decal. A quick clear coat and assembly and it was ready to rock.

Image:Klon3.png

Here's a few more quick shots of it before mailing it off:

Image:Klon4.png

Image:Klon5.png

Image:Klon6.png

Audio Demo by Todd Simpson

zmc6naa46Ac