Microphone Suggestions |
|
Microphone Suggestions |
|
|
|
|
Nov 25 2011, 11:03 AM |
Yes, this microphone is a good option if your budget is limited to 100$. There are very few options at that limit.
I would recommend that you buy it, it will serve you well for some home produced projects. On a topic: I'm using Behringer C-3 for all my recordings, and during the years it came to me that microphone is just one link in the chain. Proper acoustic treatment in the recording room is first and foremost condition for recording healthy signal. Second one is microphone preamp. I've changed 4 mic preamps so far, and every one brought an upgrade in terms of quality. Likewise, I've recorded in 4 different rooms a bunch of recordings, with various space setups, so creating even a simple acoustic treatment with curtains, carpets, furniture, separate panels already makes a big different. So, this microphone is IMHO, very good for recording vocals/acoustic guitars, providing you have a good matching preamp and decent treated booth where you can record your takes. This post has been edited by Ivan Milenkovic: Nov 25 2011, 11:05 AM -------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
||
|
|
|
Nov 25 2011, 03:33 PM |
... that microphone is just one link in the chain. Proper acoustic treatment in the recording room is first and foremost condition for recording healthy signal. Second one is microphone preamp... +1. Ultimately garbage in = garbage out. You need to get the best possible recording/tracking that you can and not rely on the mixing or mastering to correct things at a later stage. For that you really do need to try and optimise the recording chain - acoustic treatment. microphone, mic stand, cable, preamp, ADC. There is a world of difference between say a Neve preamp and a cheap, consumer one - just like there's a world of difference between a Mesa Boogie and a cheap transistor am guitar amp. Even if you can't invest in a good preamp and ADC just yet don't skimp by buying cheap mic cables and stands - it's a waste of money in the long term as you'll end up having to junk them and get good ones anyway. -------------------- Get your music professionally mastered by anl AES registered Mastering Engineer. Contact me for Audio Mastering Services and Advice and visit our website www.miromastering.com
Be friends on facebook with us here. We use professional, mastering grade hardware in our mastering studo. Our hardware includes: Cranesong Avocet II Monitor Controller, Dangerous Music Liasion Insert Hardware Router, ATC SCM Pro Monitors, Lavry Black DA11, Prism Orpheus ADC/DAC, Gyratec Gyraf XIV Parallel Passive Mastering EQ, Great River MAQ 2NV Mastering EQ, Kush Clariphonic Parallel EQ Shelf, Maselec MLA-2 Mastering Compressor, API 2500 Mastering Compressor, Eventide Eclipse Reverb/Echo. |
|
|
||
|
|
|
Nov 25 2011, 03:42 PM |
+1 on the things Tony said and specially cables. While we are on the topic of cables, I should state my mistake when starting: I needed to make a pair of balanced (TRS) connections, between audio card and distribution preamp. I had some TS cables at home, and didn't go and buy TRS ones. For quite some time I had problems of buzzing/crackling until I bought proper cables. Always make balanced connections with quality cables as it's a long term investment.
-------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
||
|
|
|
Nov 25 2011, 03:46 PM |
.... For quite some time I had problems of buzzing/crackling until I bought proper cables. ... Ouch but could have been worse Ivan as it's possible to short some preamps by plugging a non-TRS jack in when it's expecting a TRS. -------------------- Get your music professionally mastered by anl AES registered Mastering Engineer. Contact me for Audio Mastering Services and Advice and visit our website www.miromastering.com
Be friends on facebook with us here. We use professional, mastering grade hardware in our mastering studo. Our hardware includes: Cranesong Avocet II Monitor Controller, Dangerous Music Liasion Insert Hardware Router, ATC SCM Pro Monitors, Lavry Black DA11, Prism Orpheus ADC/DAC, Gyratec Gyraf XIV Parallel Passive Mastering EQ, Great River MAQ 2NV Mastering EQ, Kush Clariphonic Parallel EQ Shelf, Maselec MLA-2 Mastering Compressor, API 2500 Mastering Compressor, Eventide Eclipse Reverb/Echo. |
|
|
||
|
|
|
Nov 25 2011, 05:47 PM |
Great posts guys. I agree with Tony about the recording chain. Your option is ok for your budget. SM-57 is also a good mic for vocals and guitars but at the same time is very different the sound that you can get from each of this mics. The AKG is condenser and the other one is dynamic. The frequency response is very different. My choice for acoustic and vocals would be a condenser.
-------------------- My lessons
Do you need a Guitar Plan? Join Gab's Army Check my band:Cirse Check my soundcloud:Soundcloud Please subscribe to my:Youtube Channel |
|
|
||
|
|
|
Nov 26 2011, 06:51 AM |
thanks for the feedback guys!! appreciate it.
|
|
|
||
|
|
|
Nov 27 2011, 07:51 PM |
I have an SM-58, which I think is great. It's basically the same as a SM-57 but with mesh cover. It's a standard venue mic. But is a good all rounder mic.
|
|
|
||
|
|
|
Nov 27 2011, 09:40 PM |
I agree, SM58 is a very good all-around microphone, and has a nice top end.
-------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
||
|
|
|
Nov 27 2011, 10:15 PM |
Helpful informations here,thanks guys, I also often use SM 57 !
|
|
|
||