Simple Question Recording
daman23
Jun 17 2011, 03:16 PM
GMC:er
Posts: 58
Joined: 14-June 10
Hello

As earlier mentioned I have a POD X3.
What I want to do is, I want to record when I play over a GMC backing track. These tracks cant be downloaded.


When I have the POD plugged into my monitors, or headphones, and I plugg it into the computer, I can hear BOTH Pod guitar sound, and sound from computer. So for example If i go onto youtube and put on a song, I can hear it through the monitors.

So I can play a backingtrack, and get it to sounds out through the monitors + get my guitar sound out of it.

Shouldnt it be possible to record myself with quicktime on PC, using webcam as video, and POD as audio, and record both backing track and guitar sound?

And if not how will I do? As I said i cant download the BT

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
thefireball
Jun 17 2011, 07:26 PM
Learning Roadie
Posts: 4.537
Joined: 9-March 10
From: United States, Arkansas
I'm new with Reaper, myself, but hopefully the following steps will help you.

1. Start with a new project.
2. Ctrl+P to pull up Preferences.
3. Under Audio Section, Select Device
4. Be sure your Input device is set to what you desire.
5. Apply changes.
6. Ctrl+T to insert a new track.
7. Press the "ar" (red button) to arm the track for recording.
8. You can change where it says "Left" to Stereo Left/Right.
9. You may now press the circle record red button and begin recording.

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post
daman23
Jun 17 2011, 07:58 PM
GMC:er
Posts: 58
Joined: 14-June 10
QUOTE (thefireball @ Jun 17 2011, 06:26 PM) *
I'm new with Reaper, myself, but hopefully the following steps will help you.

1. Start with a new project.
2. Ctrl+P to pull up Preferences.
3. Under Audio Section, Select Device
4. Be sure your Input device is set to what you desire.
5. Apply changes.
6. Ctrl+T to insert a new track.
7. Press the "ar" (red button) to arm the track for recording.
8. You can change where it says "Left" to Stereo Left/Right.
9. You may now press the circle record red button and begin recording.


While doing this, or before this I should have started a web cam recording session too?
Backing track also plays a while before I start play, hope that not a problem, I can hear the track right?

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!
Go to the top of the page
 
+Quote Post



Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 




RSS Lo-Fi Version Time is now: 28th April 2024 - 08:29 PM