Guitar Project 3 Options

[snackajacks]

After finishing the bright pink guitar and the neon yellow ibanez I am going to create something new
I basically got another rg550 body ( no not again , yes again ) and a maple neck because I simply love these rg's
I am thinking about orange this time, but maybe black / white will be cool too.

Any ideas/suggestions from here? All of my fancy new hardware is going in here and it is going to be my new main guitar.
I think I have learned from the misstakes I made on the last projects and am able to create something nice.

I got all the parts so I only need the colorr


Previous Project :




Cheers

Marc

Some inspiration I found as of now :

You are at GuitarMasterClass.net

Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!

[Headbanger]

From my experience in Artwork...I think the cracking may have been caused by applying the top coat before the undercoat has fully dried. What happens is the top coat dries first and hold its place for a few hours until the coat under it continues to contract whilst drying. It can also be caused by a more oily base coat than top coat..in oil painting the rule is 'Fat over lean' to avoid subsequent cracking...cracking in the second case can result after a long time as the more oily lower layers release gases whilst continuing to dry and break through the dry top coat...Cracking can also occur if the layers are of uneven thickness...usually if there is a layer that's too thick.Its handy stuff to be aware of if you want to avoid or to choose cracking.You may already be aware of all of that....if so, apologies for butting in.

You are at GuitarMasterClass.net

Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!