So Today was my first day of my guitar building course. Spend the Morning drawing our designs. Ive gone for a modern super strat. Have to admit the plans wern't that bad. Even easier if your having a recessed floyd (No neck angle). After that The body got Planed and then got marked with a center line and then the body template was traced onto the wood. That was then cut out with a band saw then the whole thing was thickness sand down to size.
The same procedure was followed for the neck. Then I moved onto the frets. all the fret dots were marked and then drilled and then I did the same for the top of the board (man those ones are hard but I totally got them spot on) then the inlays (black mother of pearl) were dropped into the fretboard.
You are at GuitarMasterClass.net
Don't miss today's
free lick. Plus all our lessons are packed with
free content!