First Recording In My Home Studio, Home Recording
Fingerspasm
Jun 15 2009, 06:32 PM
Learning Apprentice Player
Posts: 234
Joined: 19-October 08
From: Missouri
I decided to take the leap and buy a macbook pro and some other recording equipment. I set up a little recording studio in my home office. Here is my first recording. Its my sons metalcore band. I used 6 mic's on the drums and then used a mic on the bass and the guitar. The keyboard was recorded direct. The kick was the hardest thing to get to sound right. I had to do some editing to get the sound I have so far. If anyone would care to take a listen let me know what you think about the sound and give me any advice you might have. I am open to any and all advice. I know some of you will hate the singing but its the style what can I say. smile.gif
First Recording

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!


This post has been edited by Fingerspasm: Jun 15 2009, 06:37 PM


--------------------
My Youtube - https://www.youtube.com/user/FingerSpasm?feature=mhum

Courage does not always roar. Sometimes its the quiet voice at the end of the day that says I will try again tomorrow.
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
Ivan Milenkovic
Jun 17 2009, 12:03 PM
Instructor
Posts: 25.396
Joined: 20-November 07
From: Belgrade, Serbia
Usually guitars are double tracked which means you record two mono tracks separately of the same guitar line. Both times the player plays the same thing and then you pan those two mono tracks left and right. The tracks will sound the same, but they will have those subtle differences that will make them different and the guitars will sound bigger when panned. The amount of panning depends on stereo balance of the whole mix, so always put components to some stereo width and try not to put them all together on one distance in the horizontal stereo line.
No point recording anything in that band in stereo, every component should get it's own mic and should be recorded on mono audio track. All those mono tracks are mixed later in DAW for stereo image. If you have two mics on some component, for example snare or guitar cab they still count as one track, you will pan them together not separately. The main reason you are recording two mics on snare or guitar cab in the first place is to get a better transient response, so you have more frequencies to work with.
If you need any more questions feel free to ask, I'll be glad to help mate. Great thing to hear the kids are rocking hard in their youth - keep them rockin smile.gif

You are at GuitarMasterClass.net


Don't miss today's free lick. Plus all our lessons are packed with free content!

Don't miss today's free blues, jazz & country licks. Plus all our lessons are packed with free content!


--------------------
- Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons
- (Please subscribe to my) YouTube Official Channel
- Let's be connected through ! Facebook! :)
Go to the top of the page
 
+Quote Post



Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 




RSS Lo-Fi Version Time is now: 28th April 2024 - 05:05 PM