Roland VG-99
Line 13: | Line 13: | ||
== Introduction == | == Introduction == | ||
- | In order to do this review I had to do some research, even that I did it is difficult to try to describe such an advanced product and all the possibilities this unit has. Roland has put all their effort, experience & knowledge from their technology, resources etc. in one state-of-the-art box, that is supposed to be the flagship of the coorporation in guitar technology. | + | In order to do this review I had to do some research, even that I did it is difficult to try to describe such an advanced product and all the possibilities this unit has. In fact, still after using this unit for a week, I just scratched the surface of what it really can do. Roland has put all their effort, experience & knowledge from their technology, resources etc. in one state-of-the-art box, that is supposed to be the flagship of the coorporation in guitar technology. |
This is NOT a guitar synth, even that it has some built-in sythesized sounds, it is built on a technology Roland is calling "COSM" (Composite Object Sound Modelling). Rather it models different guitar/amps/other stringed instruments through the technology of HEX-pickup systems, which is the same as guitar-synth technology though. It builds on that every string has its own pickup, rather than 1-pole/string that makes up the total signal. Therefore, every string can be manipulated individually in the unit - which gives a lot of of options. It supports Fenders "Roland-ready" guitar as well as HEX-pickup compatible guitars from Godin, Brian Moore etc. | This is NOT a guitar synth, even that it has some built-in sythesized sounds, it is built on a technology Roland is calling "COSM" (Composite Object Sound Modelling). Rather it models different guitar/amps/other stringed instruments through the technology of HEX-pickup systems, which is the same as guitar-synth technology though. It builds on that every string has its own pickup, rather than 1-pole/string that makes up the total signal. Therefore, every string can be manipulated individually in the unit - which gives a lot of of options. It supports Fenders "Roland-ready" guitar as well as HEX-pickup compatible guitars from Godin, Brian Moore etc. | ||
Line 21: | Line 21: | ||
== Product Description == | == Product Description == | ||
The unit is non-rack standard even though it can be rack-mounted with some additional mounting parts. Rolands suggests that the unit shall be used on a stand instead, which is really a good idea, when it comes to controlling the unit via the D-Beam and the Ribbon-controller. (the former versions were floor-based) The only drawback here is that in order to take full advantage of the unit, a stand + the FC-300 controller and a HEX-pickup + cable also must be purchased. (which will add some 500-600€ to the prize above, the FC-300 controller is about 300€ alone) | The unit is non-rack standard even though it can be rack-mounted with some additional mounting parts. Rolands suggests that the unit shall be used on a stand instead, which is really a good idea, when it comes to controlling the unit via the D-Beam and the Ribbon-controller. (the former versions were floor-based) The only drawback here is that in order to take full advantage of the unit, a stand + the FC-300 controller and a HEX-pickup + cable also must be purchased. (which will add some 500-600€ to the prize above, the FC-300 controller is about 300€ alone) | ||
+ | |||
'''Top view:''' | '''Top view:''' | ||
+ | All of the units parameters/knobs are located on the top of the unit and is logically placed. It also features the Ribbon-control and the D-Beam. Also the input from the HEX-cable goes here and the on/off button. The display is good and is clearly visible even in bad light. It has shortcuts for pre-programmed "chains" of sound as well as a visible tuner. | ||
+ | |||
+ | '''Rear view:''' | ||
== Sound == | == Sound == |
Revision as of 09:28, 21 December 2009
Contents |
General Information
Original Author: Staffay
Weapon: Guitar/Amp/synth COSM modeller
Make: Roland
Model: VG-99
Price: 1025€ (thomann.de)
Introduction
In order to do this review I had to do some research, even that I did it is difficult to try to describe such an advanced product and all the possibilities this unit has. In fact, still after using this unit for a week, I just scratched the surface of what it really can do. Roland has put all their effort, experience & knowledge from their technology, resources etc. in one state-of-the-art box, that is supposed to be the flagship of the coorporation in guitar technology.
This is NOT a guitar synth, even that it has some built-in sythesized sounds, it is built on a technology Roland is calling "COSM" (Composite Object Sound Modelling). Rather it models different guitar/amps/other stringed instruments through the technology of HEX-pickup systems, which is the same as guitar-synth technology though. It builds on that every string has its own pickup, rather than 1-pole/string that makes up the total signal. Therefore, every string can be manipulated individually in the unit - which gives a lot of of options. It supports Fenders "Roland-ready" guitar as well as HEX-pickup compatible guitars from Godin, Brian Moore etc.
This unit is the new version of the VG-88 that was first released in 2000, that in turn was the successor to VG-8 released in the mid 90's. Several improvements has been made since then, and the VG-99 is now a fully fledged modelling system with stunning opportunities.
Product Description
The unit is non-rack standard even though it can be rack-mounted with some additional mounting parts. Rolands suggests that the unit shall be used on a stand instead, which is really a good idea, when it comes to controlling the unit via the D-Beam and the Ribbon-controller. (the former versions were floor-based) The only drawback here is that in order to take full advantage of the unit, a stand + the FC-300 controller and a HEX-pickup + cable also must be purchased. (which will add some 500-600€ to the prize above, the FC-300 controller is about 300€ alone)
Top view:
All of the units parameters/knobs are located on the top of the unit and is logically placed. It also features the Ribbon-control and the D-Beam. Also the input from the HEX-cable goes here and the on/off button. The display is good and is clearly visible even in bad light. It has shortcuts for pre-programmed "chains" of sound as well as a visible tuner.
Rear view:
Sound
Feel
Overall Impression
Alternative Weapon
== Sound Samples ==¨ https://www.youtube.com/watch?v=IYEz192vaPs
(Feel free to add other headings as appropriate for your review)