Vox Tonelab -ST

(Difference between revisions)
Jump to: navigation, search
(Under the hood)
(Under the hood)
Line 16: Line 16:
== Under the hood ==
== Under the hood ==
-
The heart in this device is a 12AX7-tube found in the pre-amp section of most tube-amplifiers today. (and since the 50's) Further it has been combined with pedal emulations,digital effects, speaker emulation and the USB-features. There is also a pedal that can be assigned to different parameters on the device such as volume, wah-wah, delay etc. There is also a built-in tuner and memory slots for storing Your own presets. However, the device ships with a lot of good presets to start out with.
+
The heart in this device is a 12AX7-tube found in the pre-amp section of most tube-amplifiers today. (and since the 50's) Further it has been combined with pedal emulations,digital effects, speaker emulation and the USB-features. There is a pedal that can be assigned to different parameters on the device such as volume, wah-wah, delay etc. Included is also a built-in tuner and memory slots for storing Your own presets. However, the device ships with a lot of good presets to start out with. The manual is easy to read, and the device should be no surprise to those who are aquainted with regular amps/effects.
The amp-section has controls for gain, bass, middle, treble and volume (Presence is also accessible via an options button). There is 11 different amp-models to choose from including Fender, Marshall, Mesa and some other hi-gain amps, these are referred "UK-hi-gain" etc. but is easy to identify. One drawback here, is that I found no way to really by-pass the pre-amp section and use the device only as an effect module, even that if You use the "clean" -sound, You can match the sound of Your amp pretty well.
The amp-section has controls for gain, bass, middle, treble and volume (Presence is also accessible via an options button). There is 11 different amp-models to choose from including Fender, Marshall, Mesa and some other hi-gain amps, these are referred "UK-hi-gain" etc. but is easy to identify. One drawback here, is that I found no way to really by-pass the pre-amp section and use the device only as an effect module, even that if You use the "clean" -sound, You can match the sound of Your amp pretty well.

Revision as of 22:48, 30 January 2010

A quarry
A quarry

Contents

General Information

Original Author: Staffay

Weapon: Preamp/Multieffect/Amp modeller/Soundcard

Make: VOX

Model: Tonelab -ST

Price: 189 € (Thomann.de)

Introduction

VOX is the english company responsible for the classic AC-30 amp dated back to the 60's. In the latter years, the company has started to produce new ranges of amps, re-issues and replicas of their classic wah-wah. The VOX-sound stands out as a sound itself, different from the old Marshalls & Fenders. The box reviewed here, has of course the VOX-emulation but also a lot of other amps are modelled. What is a little peculiar however, is that VOX hardly mentions its soundcard capabilities in their marketing. Since the device can be connected via USB to a computer, it also work very well as a soundcard in any digital workstation similar to POD's etc.

Under the hood

The heart in this device is a 12AX7-tube found in the pre-amp section of most tube-amplifiers today. (and since the 50's) Further it has been combined with pedal emulations,digital effects, speaker emulation and the USB-features. There is a pedal that can be assigned to different parameters on the device such as volume, wah-wah, delay etc. Included is also a built-in tuner and memory slots for storing Your own presets. However, the device ships with a lot of good presets to start out with. The manual is easy to read, and the device should be no surprise to those who are aquainted with regular amps/effects.

The amp-section has controls for gain, bass, middle, treble and volume (Presence is also accessible via an options button). There is 11 different amp-models to choose from including Fender, Marshall, Mesa and some other hi-gain amps, these are referred "UK-hi-gain" etc. but is easy to identify. One drawback here, is that I found no way to really by-pass the pre-amp section and use the device only as an effect module, even that if You use the "clean" -sound, You can match the sound of Your amp pretty well.

The pedal section has

Sound

Feel

Overall Impression

Alternative Weapon

(Feel free to add other headings as appropriate for your review)