Guitar Sound Problem, Help! :) |
|
Guitar Sound Problem, Help! :) |
|
|
|
|
Mar 7 2010, 10:04 PM |
If you are using an amp you should try turning off the amp modeling on the digitech. You should have a overall volume adjucment on the unit right? Set it to a normal level (somewhere in the middle I guess). Regarding bass middle treble, you should start with having all 3 of them in neutral (flat position - 5). Increase mids to cut through the mix better but you should not be lacking in other frequencies as well. And if your sound completely dissappears when playing in a room with a drummer, maybe you want to incriease the volume of your amp a bit to better match the drums.
Hello GMC-ers!
I have a Digitech RP255 multiefect which I use for practicing and rehearsals. It has built in possibilities to combine pedals, effects, amps etc. The first thing that I'm having problem with is the sound at rehearsal. When I plug it in into the amp the tone i very lound even if the knob is turned to1. On 2 or higher it is really too loud. The apm is a 100W fender devile. I don't know if the output sgnal is to high and if this can damage the amp? Should I use only the pedal effect and leave the amp modeling out? The second thing is that I as soon the cymbals kick in my sound completely disappears. I know theat the guitar is a ''middle'' instrument and I really push the middle high up 6-7, the bas is around 0-1 and the treble 0. I also decreased the gain but still I get eaten up somehow and can't hear anything I'm playing. This is really getting frustrating because I just can't solve ti. So, any advice would be great! BR, Denis -------------------- For GMC support please email support (at) guitarmasterclass.net
Check out my lessons and my instructor board. Check out my beginner guitar lessons course! ; Take a bass course now! |
|
|
||
|
|
|
Mar 7 2010, 10:45 PM |
Perhaps you have a volume knob next to the output which adjusts the level. Check if there's one and that it's not turned up too loud.
-------------------- My bands homepage
All time favourites: B. Streisand - Woman in Love, M. Hopkin - Those were the days, L. Richie - Hello |
|
|
||
|
|
|
Mar 8 2010, 01:47 AM |
also, put ur amp as tall as you can (pointing to your head), maybe ur freq are getting lost in the way .
-------------------- Check my Instructor Profile Rockers! Got a Blog too!, www.adriantracks.com Follow me on facebook and youtube! -Youtube |
|
|
||
|
|
|
Mar 8 2010, 03:23 AM |
Some good advices here, and all should be tested definitely. One more to add is that you use the footswitch from the Deville, so you use drive channel from it, and just use effects from digitech, but putting it into FX Loop of the Deville. If you are maxed out and the drummer is still loud, perhaps you can tell him to play a bit softer. Be careful tho, drummers can be a bit strange about this matter (dunno why)
-------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
||
|
|
|
Mar 9 2010, 03:34 PM |
Hi Guys! Tnx for all the support. I really appreciate your input. I don't actually know if the deville has an fx loop. The place we play at is rented for a couple of hours with the gear so I never had a realy good chance to sit infront of it and pick on it. On the Internet it states that it does but I must say I didn't see it- which means I plugged everithing into the input . So first of all I will try to plug everithing into the FX. I read about the order in which you have to place the effects/pedals , but din't know it is so important- Second, I will try to use just the distottion without the amp modeling. Third, tell the drummer his cymbals are too loud- IMPOSSIBLE BR, Denis Mu suggestion is to try to go into studio a bit earlier than everybody, perhaps you will have 10 minutes to try everything until everybody else get ready. Regarding the cymbal issue, they can really be annoying, specially if you stand next to them. Try to raise the amp, or at least move it so you can hear it better, and find a place in the studio where you get the best balance of sound. It's usually in the center of the studio. -------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
||
|
|
|
Mar 9 2010, 06:19 PM |
Its important to get to know the amp (download users manual online etc).
When setting up the sound in studio I would suggest doing it in this order: 1 - have the drummer playing a groove at his normal volume level (including hitting the cymbals) 2 - have the bass player jam along and set his bass amp in relation to the drums 3 - setup guitar amps sound and volume in relation to bass player and drummer 4 - setup keyborads/vocals in relation to everything else This post has been edited by Bogdan Radovic: Mar 9 2010, 06:19 PM -------------------- For GMC support please email support (at) guitarmasterclass.net
Check out my lessons and my instructor board. Check out my beginner guitar lessons course! ; Take a bass course now! |
|
|
||
|
|
|
Mar 11 2010, 03:50 PM |
Haha! Im always telling our drummer to hit harder! Nobody drowns me out!! It's an interesting point what our producer once said, when you tell drummers to hit loud, they start to hit a bit faster as well, and when you tell them to hit fast, they hit a bit louder - heavy science those drums! -------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
||
|
|
|
Mar 24 2010, 08:29 PM |
Hehehe what's wrong with hard hitting drummers! I really hate when listening to a drummer playing a groove and then going to do a fill and playing everything right but really softly. It just doesn't sound right And thing with those hard hitting drummers - they can always hit even harder so they are not on the dynamics max heheh
-------------------- For GMC support please email support (at) guitarmasterclass.net
Check out my lessons and my instructor board. Check out my beginner guitar lessons course! ; Take a bass course now! |
|
|
||
|
|
|
Mar 25 2010, 07:21 PM |
Drummers have to hit hard, thats their job And the job of your amp is to make your guitar even louder
About the connections, definitely do NOT plug your digitech device into the input of the "real" amp, this will never sound good I guess. Check if it has an effect loop (it should have a send and a return jack on the back), in that case use the return jack, this should improve things a lot. -------------------- Guitars: various Gibson Les Pauls / Gibson J 45
Amps: Mesa Boogie Tripple Rectifier / Triaxis / 2:90 Poweramp / Rectocabs Effects: Rocktron Intellifex / Rocktron Xpression Homepage: www.marcussiepen.com www.blind-guardian.com Check out my video lessons! |
|
|
||