Metal Zone+line 6 Floor Pod |
|
|
|
|
Dec 10 2007, 02:26 PM
|
|
Not as far as I am aware of, since there is no way of controlling your stomp box with your Pod.
Although I don't have either of them so I'm guessing. Any more insights guys? |
 |
 
|
|
|
|
|
|
Dec 10 2007, 02:36 PM
|
|
No, im 95% sure that you cant control any external pedals with the pod. In order to do that, the floorpod would need an effects loop, which I dont think it has. But you can check it out from Line6's website
 Hope this helps-Toni -------------------- Gear:
-PRS Custom 22 -Edwards Les Paul -PodXT -Ibanez Acoustic Check out my lessons and my instructor profile! My Youtube channel My Last.FM |
|
|
|
|
|
|
|
|
Dec 10 2007, 05:39 PM
|
|
You must step on both pedals together in order to turn on\off 2 osunds. WIth practise you can accomplish it. First turn off the phaser and then MT2, and then turn on those 2 other effects. If you do it fast it can work.
This post has been edited by Milenkovic Ivan: Dec 10 2007, 05:40 PM -------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
|
|
|
|
|
|
Dec 11 2007, 02:34 AM
|
|
QUOTE (Marell @ Dec 10 2007, 08:05 PM)  This will be funny doing a gig  but have to try  Ivan does it all the time  Its cool Just arrange them that you can step on both pedals at the same time with same foot SO one pedal goes off (that was previously on) and other goes on But if you haven't bought pod I suggest you to buy normal flanger pedal , or delay ...Multieffects tend to sound really pour on gigs...They just take so much of your precious sound...  They make more harm than good
This post has been edited by Bogdan: Dec 11 2007, 02:34 AM -------------------- For GMC support please email support (at) guitarmasterclass.net
Check out my lessons and my instructor board. Check out my beginner guitar lessons course! ; Take a bass course now! |
|
|
|
|
|
|
|
|
|
Dec 11 2007, 04:55 PM
|
|
Delay can maybe be used on gigs from a proc because it does not sound too sintetic (well it does but not TOO sintetic), so focus your budget on good flangin/chorus device, possibly in one pedal.
-------------------- - Ivan's Video Chat Lesson Notes HERE
- Check out my GMC Profile and Lessons - (Please subscribe to my) YouTube Official Channel - Let's be connected through ! Facebook! :) |
|
|
|
|
|
|
|
|
|
Dec 11 2007, 05:13 PM
|
|
QUOTE (Marell @ Dec 11 2007, 04:59 PM) Ok thanks again ;]
|
|
|
|
|
|
|
|
|
Dec 11 2007, 05:15 PM
|
|
QUOTE (Marell @ Dec 10 2007, 05:25 PM) Thanks guys, but even if I can't do that I'll try to do this: switch effect (exampe flanger to delay on floor pod) one riff before the clean guitar comes in and then turn off MT 2-hope it will work,  You could get a line selector so you can manage it with just stepping on one pedal. On one line you could have --phaser--MT2-- on the other --delay--flanger-- Pressing the line selector (just a normal pedal) would switch between those two. Then you can set it up with three lines since the line selector is sitting between the guitar and amp so you could have f.ex a Wah that's always there no matter which line you choose. -------------------- My bands homepage
All time favourites: B. Streisand - Woman in Love, M. Hopkin - Those were the days, L. Richie - Hello |
|
|
|
|
 
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
