Equipping The Home Studio

An Article by Todd Simpson

Introduction

This article is about my experience with different recording gear. I've owned a few different audio interfaces and thought I'd share my experience and invite others to do the same.

Tascam M-164UF

I just added a Tascam M-164UF to my home studio and I love it so far. It's a 16 channel mixer/recording interface and connects via usb 2.0. There is no perceptible lag or delay when recording which is great. This device can be had for about $300 US and is an amazing value. So far it's the best interface I"ve ever had. It's PC and Mac comptitble, works with any DAW and the Mic preamps sound great especially for the price. It's not a Pro level unit Ala ProTools HD, but the gap betwen prosumer and pro continues to narrow. Here are a couple of pix.

It will let you record 16 tracks (6 with their own mic pre-amp) at once in to whatever software you are using. So if you want to record a drum kit, or just put several mics on your guitar rig, it's no problem. My previous units had one or two XLR inputs and recorded one or two channels at a time, this one has 6 xlr inputs and does 16 tracks at once. More review to follow as I continue to record with it.

Tascam FIREONE

TASCAM FIREONE Street Price (Around $150 Online)

I used a Tascam FireOne for about a year and was very happy with it. This is a FIREWIRE audio interface with 2 XLR Jacks that are also able to take quarter inch guitar plugs (standard guitar cable) There is also a quarter inch input on the front for putting guitar cable in to the interface without needing to get behind it.

This interface can also be used as a "Control Surface" meaning that the buttons and large jog wheel can be used to control whatever software you are using. Setting it up to actually control the software was sometimes hit or miss as it didn't ship with templates and most software doesn't instantly recognize as a controller. Still, it can be "mapped" manually and can be very handy for transport control (record, play, scrub, etc.)

The audio quality of the unit was quite good and I never had any technical issues with it. It was simply rock solid and sounded great. It works on Mac or PC, and supports MIDI. You can find these now quite cheap as it's an older model but stock is still being sold. They no longer make this one at Tascam but continue to offer drivers for it. Here is a link to the tascam site with more info.

TASCAM WEB SITE PRODUCT FIREONE

Monitors/Speakers For Mixing/Recording

There is an old saying "Whatever your mixing speakers are good at, your mixes will be bad at" So if your mixing speakers are really good at mid range and high range, then your mixes tend to sound flat when played on systems with a flat e.q. curve. If your speakers have great bass, then your mixes may lack bass when played on a system with a flat e.q. response.

Ideally, you want your speakers to be "neutral" without too much boom, or tweet. That way, you know what you are getting in your mix. If your speakers accentuate any part of the sound spectrum, it will be obvious when you play the mix on other systems.

I use two pair of monitors, KRK ROKIT 6 and Alesis MK2.
Both are paired to a subwoofer. I go back and forth between them when mixing which is a common approach. Mixing on just one pair of speakers can yield uneven results when played back outside of your mix room.

Buying the first microphones

First of all here's a nice article for you to read about Microphone types

As you equip your home studio, you will need some Mics. A good place to start is the traditional SHURE SM-58. The 58 is a "Dynamic Microphone" You can use it for vocals, you can use it on a guitar cab (the windscreen screws off and on) you can use it on drums. Really on just about anything and it will sound good. These Mics are legendary for the durability and predictable sound quality. They run about $100 and make a great first mic. Here is a pic: