Klon Centaur

Revision as of 12:37, 9 June 2017 by Fran (Talk | contribs)
Jump to: navigation, search


An article by Yoncopin


Here are a few of the details of what I put together. First, the layout was my standard stripboard, using this design Klon Centaur Silver Edition

[[Image:klon1.jpg]|650px]

I'm going to guess what Todd refers to as the secret sauce is probably the germanium diodes. The design called for a Russian D9E, but I used 1N34's as the original creator eventually revealed were used in the original. Here's some background on silicon vs germanium diodes

Next, I laid out the enclosure in Sketchup.

Image:Klon2.jpg

I almost always do this now, because it's quick and I make sure everything will fit before drilling. Below is the drilled enclosure after I applied the laser waterslide decal. A quick clear coat and assembly and it was ready to rock.

Here's a few more quick shots of it before mailing it off:

Retrieved from "http://www.guitarmasterclass.net/wiki/index.php/Klon_Centaur"